BS EN 12953-8 2001
|
ID： |
34BB6286D1D343A99F750000D6068D40 |
|
文件大小(MB)： |
0.22 |
|
页数： |
10 |
|
文件格式： |
|
|
日期： |
2013-6-1 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,12953-8:2001,Incorporating,Corrigendum No. 1,Shell boilers —,Part 8: Requirements for safeguards,against excessive pressure,The European Standard EN 12953-8:2001 has the status of a,British Standard,ICS 27.060.30; 27.100, , ,,,,, , ,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue May 15 11:08:22 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,BS EN 12953-8:2001,This British Standard, having,been prepared under the,direction of the Engineering,Sector Policy and Strategy,Committee, was published,under the authority of the,Standards Policy and Strategy,Committee on 24 May 2002,. BSI 6 August 2002,ISBN 0 580 39775 0,National foreword,This British Standard is the official English language version of,EN 12953-8:2001, including Corrigendum May 2002. It partially supersedes,BS 2790:1992 and BS 1894:1992 which will be withdrawn when Parts 1, 2, 3, 4, 5, 6 and,9 of BS EN 12953 are published.,The UK participation in its preparation was entrusted to Technical Committee,PVE/16, Shell boilers, which has the responsibility to:,A list of organizations represented on this committee can be obtained on,request to its secretary.,Additional information,The United Kingdom voted against the acceptance of this European Standard,at the Formal Vote stage. The principal UK objections have been resolved by,the issue of Corrigendum No. 1.,Cross-references,The British Standards which implement international or European,publications referred to in this document may be found in the BSI Catalogue,under the section entitled “International Standards Correspondence Index”, or,by using the “Search” facility of the BSI Electronic Catalogue or of British,Standards Online.,This publication does not purport to include all the necessary provisions of a,contract. Users are responsible for their correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,— aid enquirers to understand the text;,— present to the responsible international/European committee any,enquiries on the interpretation, or proposals for change, and keep the,UK interests informed;,— monitor related international and European developments and,promulgate them in the UK.,Summary of pages,This document comprises a front cover, an inside front cover, the EN title page,pages 2 to 7 and a back cover.,The BSI copyright date displayed in this document indicates when the,document was last issued.,Sidelining in this document indicates the most recent changes by amendment.,Amendments issued since publication,Amd. No. Date Comments,14006,Corr. No. 1,6 August 2002 Indicated by a sideline,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue May 15 11:08:22 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 12953-8,November 2001,ICS 27.060.30; 27.100 Incorporating corrigendum May 2002,English version,Shell boilers - Part 8: Requirements for safeguards against,excessive pressure,Chaudières à tubes de fumée - Partie 8: Exigences pour la,protection vis-à-vis des excès de pression,Gro遷asserraumkessel - Teil 8: Anforderungen an,Sicherheitseinrichtungen gegen Drucküberschreitung,This European Standard was approved by CEN on 7 September 2001.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Management Centre or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official,versions.,CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Management Centre: rue de Stassart, 36 B-1050 Brussels,. 2001 CEN All rights of exploitation in any form and by any means reserved,worldwide for CEN national Members.,Ref. No. EN 12953-8:2001 E,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue May 15 11:08:22 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,EN 12953-……
……